Engineering Faculty Research
Dr. Richard Burke
“Academic Internships – Rigorous or Random,” Bulletin of the State University of New York Faculty Senate, Autumn, 2009.
De Los Santos, P., R.J. Burke, and J.M. Tien,"Progressive Random Sampling with Stratification," IEEE Transactions on Systems, Man, and Cybernetics -- Part C: Applications and Reviews, Vol. 37, No. 6, November 2007.
Dr. Carl Delo
R. M. Kelso and C. Delo, Three-dimensional Imaging, Chapter 10 in Flow Visualization: Techniques and Examples, 2nd edition, A. J. Smits and T. T. Lim, eds., Imperial College Press, in preparation.
Dr. Joseph Levert
Joseph A. Levert, Chad S. Korach, Franklin Lynam, The True Contact Area for Friction in Chemical Mechanical Polishing, Society of Tribologists and Lubrication Engineers - Annual Meeting - Extended Abstracts Proceedings, May, 2010.
Levert, J.; Korach, C., CMP Friction as a Function of Slurry Silica Nanoparticle Concentration and Diameter, STLE Tribology Transactions, Volume 52, Issue 2, Pages 256 – 261, 2009.
Chad S. Korach, Joseph A. Levert, Robert Fedele, Bradley Toman, Daniel Bourbeau, Friction of Integrated Circuits for Chemical Mechanical Polishing with Varying Slurries, Society of Tribologists and Lubrication Engineers - Annual Meeting - Extended Abstracts Proceedings, May, 2009.
Joseph A. Levert, David Haas, Chad S. Korach, Nicholas Lakomcik, Edward Peters, The Variation of CMP Pad Asperity Friction as a Function of Speed and Normal Load, International Joint Tribology Conference - Extended Abstracts Proceedings, 2008.
Levert, J., Buonviri, B., Haas, D., Lakomcik, N., Leazer, J., Peters, E., Korach, C., "Friction Measurements for Chemical Mechanical Polishing of Integrated Circuit Die," Society of Tribologists and Lubrication Engineers - Annual Meeting - Extended Abstracts Proceedings, May, 2008.
Choi, J.H.; Lee, Y; DeMarco, L.E.; Leveille, R.T.; Korach, C.S.; Levert, J.A.; "Chemical Mechanical Polishing Friction Measurements with Silica Atomic Force Microscope Tips," International Joint Tribology Conference - Extended Abstracts Proceedings, August, 2007.
Levert, J.; Korach, C., CMP Friction as a Function of Slurry Silica Nanoparticle Concentration and Diameter, International Joint Tribology Conference - Extended Abstracts Proceedings, 2006.
Levert, J.; Korach, C., The Relative Friction Force Contributions of Polishing Pads and Slurries during Chemical Mechanical Polishing, World Tribology Congress – Extended Abstracts Proceedings, 2005.
Dr. Ziqian Liu
Z. Liu, S. C. Shih, and Q. Wang, “Global Robust Stabilizing Control for a Dynamic Neural Network System,” IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans, Vol. 39, No. 2, pp. 426-436, March/April, 2009.
Z. Liu, Q. Wang, and H. Schurz, “Inverse Optimal Noise-to-State Stabilization of Stochastic Recurrent Neural Networks Driven by Noise of Unknown Covariance,” Optimal Control Applications and Methods, Vol. 30, No. 2, pp. 163-178 March/April, 2009.
Z. Liu, R. Torres, N. Patel, and Q. Wang, “Further Development of Input-to-State Stabilizing Control for Dynamic Neural Network Systems,” IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans, Vol. 38, No. 6, pp. 1425-1433, November/December, 2008.
Z. Liu and Q. Wang, “Hybrid Control with Sliding-Mode plus Self-Tuning PI for Electrical Machines,” Journal of Electrical Engineering, Vol. 59, No. 3, pp. 113-121, May/June, 2008.
Z. Liu and Q. Wang, “Robust Control of Electrical Machines with Load Uncertainty”, Journal of Electrical Engineering, Vol. 59, No. 2, pp. 110-112, March/April, 2008.
Z. Liu, “Modeling and Simulation of Self-tuning PI Control for Electrical Machines”, Asian Power Electronics Journal, Vol. 1, No. 1, pp. 58-62, August 2007.
Z. Liu and Q. Wang, “Further Result on Input-to-State Stabilization of Dynamic Neural Network Systems”, Proceedings of the 2007 American Control Conference, pp. 4798-4803, New York City, USA, July 2007.
Z. Liu, “Self-tuning Control of Electrical Machines Using Gradient Descent Optimization”, Optimal Control Applications and Methods, Vol. 28, No. 2, pp. 77-93, March/April, 2007.
